About Horton Group

HORTON Group, with more than 25 years experience in Metallurgy field, is dedicated to supplying top quality products in the Steel and Foundry Industry. Horton could provide quality products, expert technical support and high level of service for the customers worldwide. HORTON offers solution service for steel and Metallurgy industry.

Centrifugal and Static Casting Steel Base Adamite Iron Roll and Ring for Rolling Mill

Properties

The microstructure consists of matrix and carbide with carbon content of 1.3-2.3%, depending on content of alloy and heat treatment process. The matrix consists of Pearlite or Bainite. With the addition of Cr, Mo and Ni for higher stability of carbide, enhanced high temperature resistance and strengthened matrix. The centrifugal roll has virtually no fall off in the hardness throughout the shell as well as highly wear and high temperature resistance and high load resistance etc. 

Mechanical Properties

Centrifugal

Static

Hardness of shell

HSD40-60

HSD40-60

Hardness of neck

HSD35-50

HSD40-55

Tensile Strength of Core

≥450Mpa

≥420Mpa

 

Chemical Analysis

C

Si

Mn

Ni

Cr

Mo

1.3/2.3

0.3/0.6

0.6/1.2

≥0.2

0.8/1.6

0.2/0.6

 

Applications

The front finishing stands of section mill and hot strip mill, the roughing and intermediate stands of bar and wire mill.